get a haynes manual. you have loosen the power steering pump..... more importantly, make sure the timing belt is done every 90k miles
How to change serpentine belt on honda civic?
Bring Honda Civic to a mechanic!
Tuesday, September 20, 2011
How do you change the serpentine belt on a 1999 ford taurus? Do I need a special tool and where can I buy one
the only tool you need is a wrench to overcome the spring pressure on the tensioning pully, A regular socket and breaker bar or ratchet will do the trick.
How do you change the serpentine belt on a 1999 ford taurus? Do I need a special tool and where can I buy one
i had a 99 taurus and i tried to use a normal socket but if you try that, the 15mm socket will go on but the wrench won't .so i had to get a serpentine belt tool i got mine at sears for about 50 but i saw them at some auto store for less some store may let you rent the tool. the tool cam with 3 different socket ends and 3 different open wrench endsprogramming cat
How do you change the serpentine belt on a 1999 ford taurus? Do I need a special tool and where can I buy one
i had a 99 taurus and i tried to use a normal socket but if you try that, the 15mm socket will go on but the wrench won't .so i had to get a serpentine belt tool i got mine at sears for about 50 but i saw them at some auto store for less some store may let you rent the tool. the tool cam with 3 different socket ends and 3 different open wrench ends
How do i change the serpentine belt on a 1997 pontiac grand am?
need diagram there isnt one under the hood and have a book it dosent show how either
How do i change the serpentine belt on a 1997 pontiac grand am?
There will be an idler wheel (a pulley that can be loosened and moved) to losen the belt. Then replace it, pry the idler wheel back tight (1/4%26quot; give to the belt) and tighten the bolt that locks it in place.
Other than that, losen and shift the alternator to one side to get the old belt off and the new one on.
Good luck!
How do i change the serpentine belt on a 1997 pontiac grand am?
If it is a V6 , you will have to remove the engine mount to replace it.Look at the little black shield over the serp belt, there's a diagram on it, I believe
There may still be a diagram on a sticker under the hood, it is there from the factory. Usually near the front by the radiator. You will need a tool to ease tension on the Idler Pulley assembly. No other tools needed. Follow the diagram to install new belt.
You can call your dealership and they can print you one out for free and maybe even e mail it to you. If not you can pick it up. P.S. Have you asked Jeeves yet?
It's easy there is just a tension arm that you have to pull back with a screw driver or something and put it on.Just make a mental reminder of the old belt .Goodluck.
How do i change the serpentine belt on a 1997 pontiac grand am?
There will be an idler wheel (a pulley that can be loosened and moved) to losen the belt. Then replace it, pry the idler wheel back tight (1/4%26quot; give to the belt) and tighten the bolt that locks it in place.
Other than that, losen and shift the alternator to one side to get the old belt off and the new one on.
Good luck!
How do i change the serpentine belt on a 1997 pontiac grand am?
If it is a V6 , you will have to remove the engine mount to replace it.Look at the little black shield over the serp belt, there's a diagram on it, I believe
There may still be a diagram on a sticker under the hood, it is there from the factory. Usually near the front by the radiator. You will need a tool to ease tension on the Idler Pulley assembly. No other tools needed. Follow the diagram to install new belt.
You can call your dealership and they can print you one out for free and maybe even e mail it to you. If not you can pick it up. P.S. Have you asked Jeeves yet?
It's easy there is just a tension arm that you have to pull back with a screw driver or something and put it on.Just make a mental reminder of the old belt .Goodluck.
How do i change a serpentine belt on a 1993 chrysler lebaron?
For about $18 you can pickup a Haynes manual at yer local parts shop.It'll have all the info for this repair %26amp; lots more,plus all the maintenance for the car.Good Luck
How do i change a serpentine belt on a 1993 chrysler lebaron?
if you are not familiar with this procedure i would recommend taking it to a garage
How do i change a serpentine belt on a 1993 chrysler lebaron?
There is a belt tensioner with a 15mm bolt, put a closed end wrench on the nut, attach a long closed end wrench to the open side of the 15mm wrench (to add leverage) and turn the pulley upward (clockwise) Pay attention to the belt routing and install the belt the same way adding it to the tensioner last. Get a manual any way to provide info and instruction on routine repairs.
There's a 15mm bolt on the end of the tensioner, put a LONG wrench on the bolt, and push down to relieve the pressure. Best bet on replacement is to thread everything EXCEPT the alternator, a helper can then grab the top of that belt, and place it on the pulley as you push down on the wrench attached to the tensioner.
How do i change a serpentine belt on a 1993 chrysler lebaron?
if you are not familiar with this procedure i would recommend taking it to a garage
How do i change a serpentine belt on a 1993 chrysler lebaron?
There is a belt tensioner with a 15mm bolt, put a closed end wrench on the nut, attach a long closed end wrench to the open side of the 15mm wrench (to add leverage) and turn the pulley upward (clockwise) Pay attention to the belt routing and install the belt the same way adding it to the tensioner last. Get a manual any way to provide info and instruction on routine repairs.
There's a 15mm bolt on the end of the tensioner, put a LONG wrench on the bolt, and push down to relieve the pressure. Best bet on replacement is to thread everything EXCEPT the alternator, a helper can then grab the top of that belt, and place it on the pulley as you push down on the wrench attached to the tensioner.
I need some advice on how to change a serpentine belt on a 1999 Plymouth Voyager. Is there some trick to it?
make sure you change the water pump at same time
I need some advice on how to change a serpentine belt on a 1999 Plymouth Voyager. Is there some trick to it?
The tensioner is REAL tricky to get to loosen from the top-'way easier from the bottom.
I need some advice on how to change a serpentine belt on a 1999 Plymouth Voyager. Is there some trick to it?
Those belts are a pain. While you are at the shop and it on the lift, I usually have a technician sit in the engine compartment then lift the vehicle on a lift, then a guy at the bottom can work with the tensioner while the guy at the top can line up all top pullies, we have it down to about 4 minutes from start to finish good luck.
I need some advice on how to change a serpentine belt on a 1999 Plymouth Voyager. Is there some trick to it?
The tensioner is REAL tricky to get to loosen from the top-'way easier from the bottom.
I need some advice on how to change a serpentine belt on a 1999 Plymouth Voyager. Is there some trick to it?
Those belts are a pain. While you are at the shop and it on the lift, I usually have a technician sit in the engine compartment then lift the vehicle on a lift, then a guy at the bottom can work with the tensioner while the guy at the top can line up all top pullies, we have it down to about 4 minutes from start to finish good luck.
How to change a serpentine belt on a 2000 ford f 150 6 cyl. 4.2?
I know there is a tensioner but is it spring loaded? if not how do u get it to loosen so that u can? This one seems to be froze up or something and i dont want to brake the bolt if its just cause im not doing something wright
How to change a serpentine belt on a 2000 ford f 150 6 cyl. 4.2?
most Fords have a bolt on the tensioner that when released goes %26quot;boing%26quot; and releases the belt. Find a bolt and undo it.. if that doesn't work tighten it up again and try another.
You dont %26quot;adjust%26quot; the tensioner when the belts back in as such.. The tensioner has a spring in it that does the job for you.
Once the belt is off, look at the tensioner. You'll see that you can wind up the spring then lock it temporarily with the bolt. Then when you fit the new belt, you just release the bolt again and it tensions itself up.
It is a lot harder to explain than to do. Take a photo of the belt before you take it off. Them suckers can be real confusing to thread back the correct way
How to change a serpentine belt on a 2000 ford f 150 6 cyl. 4.2?
most Fords have a bolt on the tensioner that when released goes %26quot;boing%26quot; and releases the belt. Find a bolt and undo it.. if that doesn't work tighten it up again and try another.
You dont %26quot;adjust%26quot; the tensioner when the belts back in as such.. The tensioner has a spring in it that does the job for you.
Once the belt is off, look at the tensioner. You'll see that you can wind up the spring then lock it temporarily with the bolt. Then when you fit the new belt, you just release the bolt again and it tensions itself up.
It is a lot harder to explain than to do. Take a photo of the belt before you take it off. Them suckers can be real confusing to thread back the correct way
How to change serpentine belt on 97 taurus?
With a 1/2%26quot; ratchet, release the tensioner (there is a hole on the tensioner arm), remove the old belt, and install the new one. It may be a bit more challenging than sounds but not rocket science.
How to change serpentine belt on 97 taurus?
What do you need help with? If you need to know how to put it back on then there should be a diagram to show you under the hood.
How to change serpentine belt on 97 taurus?
first go to your local auto supply store and tell them the year make and model of you car
they will give you the right belt,
completely remove any peices of your old belt
follow the belt map found on a sticker under your hood usually near the radiator, take a half inch socket wrench and push down the tension wheel until the belt can slip over the tension wheel and bang your donemsdn hair spray
How to change serpentine belt on 97 taurus?
What do you need help with? If you need to know how to put it back on then there should be a diagram to show you under the hood.
How to change serpentine belt on 97 taurus?
first go to your local auto supply store and tell them the year make and model of you car
they will give you the right belt,
completely remove any peices of your old belt
follow the belt map found on a sticker under your hood usually near the radiator, take a half inch socket wrench and push down the tension wheel until the belt can slip over the tension wheel and bang your done
Subscribe to:
Posts
(Atom)